WaveTrader - CSV intraday analysis

Bryce Gilmore's Day Trading Ratio Analysis  Software [c] 2002

IMPORTANT WARNING TO IMITATORS and people selling pirate copies of our software.
The analysis routines in my books and this software are the intellectual property of Bryce Gilmore and if our copyrights are breached we will instigate law suits and claim for damages in excess of $10,000,000  - Bryce Gilmore's routines and approaches to technical analysis are uniquely original and we can prove it. As for existing imitators copying Bryce Gilmore's work and intelectual property we have already employed legal people to gather evidence and we have the intention to sue.

TO ENTER SCROLL MODE from MAIN - Key [+]
TO EXIT SCROLL MODE to MAIN - Key [Esc]
TO EXIT MAIN CHART MODE to SELECTION MENU - Key [Esc]

Part 2: Operating the Important Routines.
1. The Price [5-2] Unit Measuring Tool  and [aAbB-cCdD] Markers for [E] Wave routine CSV-11
2 RETRACEMENT TOOL: The [aA-bB] Retracement Tool. CSV-12
3 The chart high low range LAYER OVERLAY Tool for a Zoomed Range. CSV-13
4 ALTERNATE WAVE PROJECTION TOOL:  [aA-bB and cC] Projection Tool. CSV-14
5 The  Swing Location Tool. [Alt S] CSV-15
6 X-ABCD Interogation - Looking for Ratios in waves of similar degree. CSV-16
7 The [Alt X] Swing interogation tool for the automatic examination of the [cC-dD] leg and finer points. CSV-17

8		 You should be getting the idea by now if you have worked through the examples above.
9 Drawing Tools - Trend Lines [aA/bB - T]  - Horizontal Lines [g] - Cycle Routine [W] with (aA-bB) CSV-19
10 Gann SQR 9 projections from highs or lows [Alt H or L] CSV-20
11 Gann Interogation of an [aA-bB] marked move - [Alt Q] CSV-21
12 Gann Angles from highs or lows - [Alt A] CSV-21
13 Gann Squaring Range Routine [P] - redraw SQUARE chart [*] - Change 1x1 rate [S] CSV-21
14 The % Change Tool for projecting a level & The $ unit Tool for projecting a level. CSV-22
15 CHART GRIDS -  Vertical time cycles [Shift W] and Incremented price levels [Shift G] CSV-23
16 Time RATIO Projection Routine [Alt T] CSV-24
17 Clearing a chart of workings [Q] - With some GANN ROUTINES CSV-25
18 Edit in a new price level to a bar - HIGH or LOW [Alt E]

Check (abcd) Marker Location Routine. [M]




MAIN MODE Routines:

To erase all lines and return chart to default - Key [Q] - also clears and restores MAIN MODE

Gann Trend SWING routine (2-34 bars) - Key [S] then enter value. CSV-S

 Average Range over last 10 bars  - Key [A] CSV-A

 Change Scale for Chart high to low range. - Key [|]

Back to top of page





MARKER KEYS:
The [5-2] Price unit measuring Tool and the Square of 9 calculation.
The [aAbB - cCdD] Marker System.
The [E] Elliott Wave Comparison Routine.




RETRACEMENT TOOL:
The [aA-bB] Retracement Tool [Alt R]

To CLEAR SCREEN of workings Key [Q] the aAbB markers will remain where you tagged them.
If you want to see where the markers are Key [M] in Scroll Mode.

SINGLE RETRACEMENTS:



QUICKLY OVERLAY PRICE LEVELS OF A CHART RANGE: Key [0]
Visually you can see if the market pivots may be in a geometric position.



ALTERNATE WAVE PROJECTIONS:
The [aA-bB and cC] Projection Tool.
Note: When using the [5]-Single choice you will have to enter a +(up)  or - (down)
ratio value to make the projection go up or down



SWING CREATION TOOL: [Alt S]
Place the indicator on a market pivot and select [Alt S] - enter a unit move as the minimum swing
to calculate - tell the routine if the pivot you selected is a High or a Low (You will be prompted).

This routine is a trial and error routine until you visually see the waves you wish to isolate for analysis.
If the swings are to large reduce the unit value - if they are to small increase the unit value.

You can keep overlaying swings until you get the right perspective, when you find it you can clear
all workings [Q] and then go back and run the [Alt S] at the value you wish to use.


X-ABCD Report [Shift X]:
First run the [Alt S] to create the swings - then Key [Shift X]


The [Shift X] Swing interogation Tool for the [Alt S] and the X-ABCD Calculations.



SWING INTEROGATION all waves between [5-2] and the CD SWING:
The [Alt X] Swing interogation tool for the automatic examination of the [cC-dD] leg.
Before you run this routine you need to set the [5-2] markers after running CSV16 - if you wish to
run this routine using a different CD swing you will have to reset the cCdD markers to the desired
position. I will give you an example below this standard one.


DRAWING TOOLS
Trend Lines [T]
Cycles [W] - Vertical Lines [Shift W] not illustrated
Price Levels [Shift G]
If you want Grids use a value for the grids e.g., 10 points.



GANN SQUARE 9:
Levels from Lows [Alt L]
Levels from highs [Alt H]
Locate indicator on pivot to make calculations from.



GANN INTEROGATION TOOL: [ALT Q]
Uses the aA-bB markers
Price Range, % change, Square root of range, Square of 9 degrees moved, Vibration.
The [P] key will square the range and the [*] keys allows you to draw the chart square to the 1x1

If you want to draw GANN Angles use the [Alt A] prompt and select any angle, eg., 0.500 = 1x2
If you want to set the 1x1 angle rate to any value, eg., 1 unit per hour use the [S] key.

Angles are probably a bit nebulous for intra-day trading so I wouldn't worry about them to much.


DRAWING TOOLS:  [$] [%]


VERTICAL & HORIZONTAL COUNTERS:




TIME PROJECTION TOOL: [Alt T]

Place Indicator on point where projection is to begin and Key [Alt T] - follow the prompts.

If you wanted to do Fibonacci Counters use the [2] Elliott selection and ENTER a time count of 144 like
this example.


CLEAR A CHART OF WORKINGS: [Q]

GANN SWING ROUTINE  [S]  - MAIN
 S routine

  DAILY RANGES for past 10 days with Average daily range:
CSV-A
 

Back to Top